# TerraHawk flight parameters: the stall-test flight only (docs/stall-test.md). Load after the airframe file for
# that flight, and load params/terrahawk-common.parm again after it, so Q_ASSIST_SPEED returns to 18 or to the
# referred stall plus 1 m/s (the card's "After the test"). LCK_ENABLE 0 for the flight is the card's own step.
# An overlay: tools/checklist_code.py leaves its names out of the checklist gate, so the every-flight codes hold.
# Below the expected stall, so the speed assist does not hide the break (stall-test.md). 12, was 14: on Fuselage C
# the side ports read low near the stall, and th-aeronautics expects the wings-level break at about 14.0 indicated
# (16.8 EAS); in SITL every wings-level point ended on Q-assist at 14.3 indicated, alpha 12.1, before the break
# (th-testpilot, thread ee6d217f, 2026-10-19). 12 indicated is about 14.4 EAS, under the stall, so the assist stays
# the net after the break. LCK_ENABLE 0 is still the card's own step (an overlay row would ungate it on every flight).
Q_ASSIST_SPEED    12