The aircraft as the first build prints it: Fuselage C v2.4B with its canopy and the dome over the Q43, the blank payload cover (no Survey3W on the first build), the EMAX ECO II 2807 lift motors on Gemfan F8041 props, and the fixed APC 10 × 7E pusher on the EMAX 3115. The nose is our Nose Cone on five magnet pairs, with our own 4 mm brass total tube beside the camera, its mouth open and 7° tip down, and the camera 15° down on its cheeks (th-blender W104); the two video antennas stand port in the nose ring and starboard on the roof aft of the static lines (th-blender W127.1); our own-section wing carries its fence at X 445.
- Series
- The airframe
- Engine
- Cycles
- Resolution
- 2400 × 1500
- Source
blender/renders/22-first-build-cycles.png
