Gallery

37 renders · generated from the part files

Every image here is built by a script from the part files, so it shows the parts as they actually are. Materials are procedural: layer lines run along each part's print axis, and the lightweight PLA has its foamed speckle. Select a render to wipe between colourways.

Show series

AllThe airframe6Details9Landing gear1The hangar11Workbench scenes10

Lightweight-PLA colourway

GreenIvory

The airframeFirst buildThe airframeFirst build, explodedDetailsPayload bayDetailsHatch liftedThe hangarHangar, rolled open

The airframe

The first build, Fuselage C v2.4B, path-traced in Cycles under a small-studio HDRI from the parts as they print.

• CyclesFirst build
• CyclesFirst build, flight configuration
• CyclesFirst build, exploded
• CyclesFirst build, every part apart
• WorkbenchFirst build, cut away
• WorkbenchFirst build, mass and CG

Details

Close-ups where the materials earn their keep: layer lines, foam, woven carbon, anodised motors.

• CyclesPayload bay
• CyclesHatch lifted
• CyclesInside the nose
• CyclesAntenna grommets
• CyclesJ2, the split bulkhead
• CyclesVTOL motor mount
• CyclesFoamed surface
• CyclesVTOL Section
• CyclesElevon linkage

Landing gear

Keel B, the first build's landing gear.

• CyclesKeel B

The hangar

The roll-off dock that was chosen, generated by tools/hangar.py.

• CyclesHangar, rolled open
• CyclesHangar, closed
• CyclesHangar cutaway
• CyclesKeels on the pad
• WorkbenchRoof mid-travel
• WorkbenchPlan
• WorkbenchPad from above
• WorkbenchClosed
• WorkbenchOpen
• WorkbenchCutaway
• WorkbenchPrinted drive parts

Workbench scenes

Fast Workbench renders of each scene in the Blender file, one per assembly stage.

• WorkbenchFirst build
• WorkbenchFirst build, flight configuration
• WorkbenchFirst build, exploded
• WorkbenchFirst build, every part apart
• WorkbenchParts by category
• WorkbenchParts by material
• WorkbenchFuselage
• WorkbenchVTOL Section
• WorkbenchPort wing
• WorkbenchNose