Skip to content
TerraHawkTerraHawk

VTOL motor mount

Close-up of a grey brushless motor with a three-blade folding propeller, sitting on a dark printed mount at the end of a carbon tube, with a printed sleeve and a pale printed strut running down out of frame below it., ivory colourwayClose-up of a grey brushless motor with a three-blade folding propeller, sitting on a dark printed mount at the end of a carbon tube, with a printed sleeve and a pale printed strut running down out of frame below it., green colourway

The port front lift pod of Fuselage C v2.4B from forward and above: the EMAX ECO II 2807 on the VTOL Section's PETG spar mount at the tip of the 14 mm spar, with the Gemfan F8041 3-blade prop on it, and under the pod the front stilt's PETG bolt-pilot mount with the LW-PLA stilt blade running down out of it (th-blender W83).

Series
Details
Engine
Cycles
Resolution
2400 × 1500
Source
blender/renders/09-detail-motor-mount-cycles.png
Full size, greenFull size, ivory

More from details

Comments on

    Comments are reviewed before they appear. Please leave out places, addresses and other personal details.

    A Supported Systems Flight

    This build log is written and kept by Supported Systems, a small studio that makes thoughtful, user-first technology. The airframe, the hangar and the simulation are ours.

    Visit supported.systems