Skip to content
TerraHawkTerraHawk
Hold: do not print the aircraft (Ryan, 2026-10-10). The first build is Fuselage C v2.4B, and its beds wait for Ryan's go. Bench tools and test prints are exempt: they are not airframe parts, so they can print now (Ryan, 2026-10-11).

g08: Elevons

Print jobs / First build

On hold: do not print this bed yet. All flight-part printing is held until Ryan releases the Fuselage C bed plan.

Elevon (own section) (C v2.4B) Elevon (own section) (C v2.4B) (starboard)
Top view to scale, 400 × 400 mm bed, 10 mm grid.

Parts

Point at a part to find it on the plan.

PartQtySourcePrinted from
Elevon (own section) (C v2.4B)1Ourssame
Elevon (own section) (C v2.4B) (starboard)1Ourssame

Source: slicing/jobs/g08-lw-elevons.mdx, written by tools/print_jobs.py from tools/slice_all.py (g08-lw-Elevons).

Comments on

    Comments are reviewed before they appear. Please leave out places, addresses and other personal details.

    A Supported Systems Flight

    This build log is written and kept by Supported Systems, a small studio that makes thoughtful, user-first technology. The airframe, the hangar and the simulation are ours.

    Visit supported.systems