g23: Clear Light Windows
Print jobs / First build
Released to print by Ryan on 2026-10-19.
Changed since it was printed. The sliced file is not the one that printed on 2026-10-19 (job 93). A reprint uses the new file. Re-sliced on 2026-10-20 only to name the parts in the G-code (090f23a5); the geometry and settings are the same as the file that printed.
Parts
Point at a part to find it on the plan.
| Part | Qty | Source | Printed from |
|---|---|---|---|
| Position Light Window (tail) (C v2.4B) | 1 | Ours | same |
| Position Light Window (tip) (own section) (C v2.4B) | 1 | Ours | same |
| Position Light Window (tip) (own section) (C v2.4B) (starboard) | 1 | Ours | same |
| Strobe Clip Ring (C v2.4B) | 1 | Ours | same |
Print record
| Date | Printer | Job | File | Result |
|---|---|---|---|---|
| 2026-10-19 | Prusa Core One+ | 93 | 3c05edc0earlier file | ok, all four kept (Strobe Clip Ring, tail window, both tip windows), with the 5 mm brim |
Source: slicing/jobs/g23-petg-clear-light-windows.mdx, written by tools/print_jobs.py from tools/slice_all.py (g23-petg-Clear Light Windows).
Comments
Comment on the whole page here, or on one section or step with the button beside it.