Skip to content
TerraHawkTerraHawk
Hold: do not print the aircraft (Ryan, 2026-10-10). The first build is Fuselage C v2.4B, and its beds wait for Ryan's go. Bench tools and test prints are exempt: they are not airframe parts, so they can print now (Ryan, 2026-10-11).

ESC Pod Cradles S50

Print jobs / DroneCAN pod path

ESC Pod Cradle S50 ESC Pod Cradle S50 ESC Pod Cradle S50 (starboard) ESC Pod Cradle S50 (starboard)
Top view to scale, 250 × 220 mm bed, 10 mm grid.

Parts

Point at a part to find it on the plan.

PartQtySourcePrinted from
ESC Pod Cradle S502Ourssame
ESC Pod Cradle S50 (starboard)2Ourssame

Source: slicing/jobs/petg-esc-pod-cradles-s50.mdx, written by tools/print_jobs.py from tools/slice_all.py (petg-ESC Pod Cradles S50).

Comments on

    Comments are reviewed before they appear. Please leave out places, addresses and other personal details.

    A Supported Systems Flight

    This build log is written and kept by Supported Systems, a small studio that makes thoughtful, user-first technology. The airframe, the hangar and the simulation are ours.

    Visit supported.systems