Skip to content
TerraHawkTerraHawk
Hold: do not print the aircraft (Ryan, 2026-10-10). The first build is Fuselage C v2.4B, and its beds wait for Ryan's go. Bench tools and test prints are exempt: they are not airframe parts, so they can print now (Ryan, 2026-10-11).

GNSS Coupon Canopy Cup

Print jobs / Test prints

Changed since it was printed. The sliced file is not the one that printed on 2026-10-18 (job 84). A reprint uses the new file.

GNSS Coupon Canopy Cup (PETG)
Top view to scale, 250 × 220 mm bed, 10 mm grid.

Parts

Point at a part to find it on the plan.

PartQtySourcePrinted from
GNSS Coupon Canopy Cup (PETG)1Ourssame
DatePrinterJobFileResult
2026-10-18Prusa Core One+84803f5415earlier fileok, the 240 °C file

Source: slicing/jobs/petg-gnss-coupon-canopy-cup.mdx, written by tools/print_jobs.py from tools/slice_all.py (petg-GNSS Coupon Canopy Cup).

Comments on

    Comments are reviewed before they appear. Please leave out places, addresses and other personal details.

    A Supported Systems Flight

    This build log is written and kept by Supported Systems, a small studio that makes thoughtful, user-first technology. The airframe, the hangar and the simulation are ours.

    Visit supported.systems