g11: Mounts Hardware and Lights

Print jobs / First build

Released to print by Ryan on 2026-10-19.

Top view to scale, 250 × 220 mm bed, 10 mm grid.

Parts

Point at a part to find it on the plan.

Part	Qty	Source	Printed from
Pusher Motor Mount (C v2.4B, ours)	1	Ours	same
Wing Clip (C v2.4B, ours)	1	Ours	same
Wing Clip (C v2.4B, ours) (starboard)	1	Ours	same
Landing Light Frame (C v2.4B)	1	Ours	same
Strobe Plate (C v2.4B)	1	Ours	same
Strobe Ring (top) (C v2.4B) [print foot]	1	Ours	same
Strobe Dome Buck (C v2.4B)	1	Ours	same

Print record

Date	Printer	Job	File	Result
2026-10-19	Prusa Core One+	94	`aad33d3d` (g11-petg-Mounts and Hardware.bgcode)	the old g11 bed before the merge: Pusher Motor Mount and both Wing Clips kept; the clips need re-orienting (Ryan)
2026-10-20	Prusa Core One+	96	`1961403b` (g11-petg-Mounts Hardware Lights and Payload Cover (no Pusher Motor Mount).bgcode)	failed at about 13 %: something caught in the filament (Ryan); the file was byte-identical on the printer
2026-10-20	Prusa Core One+	97	`1961403b` (g11-petg-Mounts Hardware Lights and Payload Cover (no Pusher Motor Mount).bgcode)	failed again, cancelled (Ryan); the third filament snag on this spool in a few days. The cover then split from the six short parts
2026-10-20	Prusa Core One+	98	`60065840` (g11-petg-Mounts Hardware Lights and Payload Cover (lights and wing clips).bgcode)	5 of 6 kept (Strobe Dome Buck, Landing Light Frame, Strobe Plate, both Wing Clips on their flipped face). The Strobe Ring (top) peeled off the sheet and Ryan cancelled it: a thin hoop, 13.4 mm tall, on about 50 to 120 mm2 of contact, so it needs a model change (a foot or webs)

Source: slicing/jobs/g11-petg-mounts-hardware-and-lights.mdx, written by tools/print_jobs.py from tools/slice_all.py (g11-petg-Mounts Hardware and Lights).