Skip to content
TerraHawkTerraHawk
Hold: do not print the aircraft (Ryan, 2026-10-10). The first build is Fuselage C v2.4B, and its beds wait for Ryan's go. Bench tools and test prints are exempt: they are not airframe parts, so they can print now (Ryan, 2026-10-11).

g12: Plates and Fences

Print jobs / First build

On hold: do not print this bed yet. All flight-part printing is held until Ryan releases the Fuselage C bed plan.

Nose Ring Plate Nose Cone Plate (C v2.4B, ours) Fuselage C v2.4B VTOL Section Plate (PETG) (port) Fuselage C v2.4B VTOL Section Plate (PETG) (starboard) Wing Inner Plate (C v2.4B, ours) Wing Inner Plate (C v2.4B, ours) (starboard) Wing Fence (own section, X 445) (C v2.4B) Wing Fence (own section, X 445) (C v2.4B) (starboard)
Top view to scale, 250 × 220 mm bed, 10 mm grid.

Parts

Point at a part to find it on the plan.

PartQtySourcePrinted from
Nose Cone Plate (C v2.4B, ours)1Ourssame
Nose Ring Plate1Ourssame
Fuselage C v2.4B VTOL Section Plate (PETG) (port)1Ourssame
Fuselage C v2.4B VTOL Section Plate (PETG) (starboard)1Ourssame
Wing Inner Plate (C v2.4B, ours)1Ourssame
Wing Inner Plate (C v2.4B, ours) (starboard)1Ourssame
Wing Fence (own section, X 445) (C v2.4B)1Ourssame
Wing Fence (own section, X 445) (C v2.4B) (starboard)1Ourssame

Source: slicing/jobs/g12-petg-plates-and-fences.mdx, written by tools/print_jobs.py from tools/slice_all.py (g12-petg-Plates and Fences).

Comments on

    Comments are reviewed before they appear. Please leave out places, addresses and other personal details.

    A Supported Systems Flight

    This build log is written and kept by Supported Systems, a small studio that makes thoughtful, user-first technology. The airframe, the hangar and the simulation are ours.

    Visit supported.systems