g19: Keel B and Stilt B Soles
Print jobs / First build
Released to print by Ryan on 2026-10-19.
Changed since it was printed. The sliced file is not the one that printed on 2026-10-19 (job 92). A reprint uses the new file.
Parts
Point at a part to find it on the plan.
| Part | Qty | Source | Printed from |
|---|---|---|---|
| Keel B Sole (bead boss) | 1 | Ours | same |
| Keel B Sole (bead boss)mirrored | 1 | Ours | same |
| Front Stilt B Sole | 1 | Ours | same |
| Front Stilt B Solemirrored | 1 | Ours | same |
Print record
| Date | Printer | Job | File | Result |
|---|---|---|---|---|
| 2026-10-19 | Prusa Core One+ | 92 | 3ca612faearlier file | ok, all four kept (both Keel B Soles, both Front Stilt B Soles) with the 5 mm brim and no supports; Ryan: "all done, perfect" |
Source: slicing/jobs/g19-petg-keel-b-and-stilt-b-soles.mdx, written by tools/print_jobs.py from tools/slice_all.py (g19-petg-Keel B and Stilt B Soles).
Comments
Comment on the whole page here, or on one section or step with the button beside it.