Skip to content
TerraHawkTerraHawk
Hold: do not print the aircraft (Ryan, 2026-10-10). The first build is Fuselage C v2.4B, and its beds wait for Ryan's go. Bench tools and test prints are exempt: they are not airframe parts, so they can print now (Ryan, 2026-10-11).

g18: Keel B and Stilt B Blades and Lids

Print jobs / First build

On hold: do not print this bed yet. All flight-part printing is held until Ryan releases the Fuselage C bed plan. Also waiting: keel B's coax redesign (th-blender W116.1, W116.2) is in, but the cassette's MMCX jack and plug must be measured with calipers against the 5 mm bay first.

Antenna Cassette Lid (keel B) Antenna Cassette Lid (keel B) (starboard) Keel B Blade (antenna bay) Keel B Blade (antenna bay), mirrored Front Stilt B Blade (cored) Front Stilt B Blade (cored) (starboard)
Top view to scale, 250 × 220 mm bed, 10 mm grid.

Parts

Point at a part to find it on the plan.

PartQtySourcePrinted from
Keel B Blade (antenna bay)1Ourssame
Keel B Blade (antenna bay)mirrored1Ourssame
Front Stilt B Blade (cored)1Ourssame
Front Stilt B Blade (cored) (starboard)1Ourssame
Antenna Cassette Lid (keel B)1Ourssame
Antenna Cassette Lid (keel B) (starboard)1Ourssame

Source: slicing/jobs/g18-lw-keel-b-and-stilt-b-blades-and-lids.mdx, written by tools/print_jobs.py from tools/slice_all.py (g18-lw-Keel B and Stilt B Blades and Lids).

Comments on

    Comments are reviewed before they appear. Please leave out places, addresses and other personal details.

    A Supported Systems Flight

    This build log is written and kept by Supported Systems, a small studio that makes thoughtful, user-first technology. The airframe, the hangar and the simulation are ours.

    Visit supported.systems