Skip to content
TerraHawkTerraHawk
Hold: do not print the aircraft (Ryan, 2026-10-10). The first build is Fuselage C v2.4B, and its beds wait for Ryan's go. Bench tools and test prints are exempt: they are not airframe parts, so they can print now (Ryan, 2026-10-11).

g17: Keel B and Stilt B Mounts

Print jobs / First build

On hold: do not print this bed yet. All flight-part printing is held until Ryan releases the Fuselage C bed plan. Also waiting: keel B's coax redesign (th-blender W116.1, W116.2) is in, but the cassette's MMCX jack and plug must be measured with calipers against the 5 mm bay first.

Keel B Mount (cable riser) Keel B Mount (cable riser) (starboard) Front Stilt B Mount (bolt pilot) Front Stilt B Mount (bolt pilot), mirrored
Top view to scale, 250 × 220 mm bed, 10 mm grid.

Parts

Point at a part to find it on the plan.

PartQtySourcePrinted from
Keel B Mount (cable riser)1Ourssame
Keel B Mount (cable riser) (starboard)1Ourssame
Front Stilt B Mount (bolt pilot)1Ourssame
Front Stilt B Mount (bolt pilot)mirrored1Ourssame

Source: slicing/jobs/g17-petg-keel-b-and-stilt-b-mounts.mdx, written by tools/print_jobs.py from tools/slice_all.py (g17-petg-Keel B and Stilt B Mounts).

Comments on

    Comments are reviewed before they appear. Please leave out places, addresses and other personal details.

    A Supported Systems Flight

    This build log is written and kept by Supported Systems, a small studio that makes thoughtful, user-first technology. The airframe, the hangar and the simulation are ours.

    Visit supported.systems