g16: Servo Airspeed Radio Holders and Slider
Print jobs / First build
On hold: do not print this bed yet. All flight-part printing is held until Ryan releases the Fuselage C bed plan.
Parts
Point at a part to find it on the plan.
| Part | Qty | Source | Printed from |
|---|---|---|---|
| Airspeed Nose Bracket | 1 | Ours | same |
| Radio Cradle Lid (XIAO) | 1 | Ours | same |
| CG Slider (port) | 1 | Ours | same |
| CG Slider (starboard) | 1 | Ours | same |
| CG Slider Pinion | 1 | Ours | same |
| SMA Bulkhead Bracket (J2 single, port wall, split) | 1 | Ours | same |
| Power Hub Pad (port wall) | 1 | Ours | same |
| LoRa A Coax Clip (rise, port wall) | 1 | Ours | same |
| LoRa B Park Saddle (C v2.4B) | 1 | Ours | same |
| Trim Bracket (C v2.4B) | 1 | Ours | same |
| Radio Pigtail Clip (port wall) | 1 | Ours | same |
| SMA Bulkhead Bracket (ELRS, Spar Box) (port) | 1 | Ours | same |
| SMA Bulkhead Bracket (ELRS, Spar Box) (starboard) | 1 | Ours | same |
| RP4TD Pigtail Tie Bar (Bay) (port) | 1 | Ours | same |
| RP4TD Pigtail Tie Bar (Bay) (starboard) | 1 | Ours | same |
| Static Line Clip (starboard wall) | 1 | Ours | same |
| Servo Mount MD65MG (own wing) (C v2.4B) | 1 | Ours | same |
| Servo Mount MD65MG (own wing) (C v2.4B) (starboard) | 1 | Ours | same |
| M10 Hanger (C v2.4B) | 1 | Ours | same |
| Fuselage C v2.4B Hatch Catch (PETG) | 1 | Ours | same |
| Lights Node Seat Pad (C v2.4B, forward) | 1 | Ours | same |
| Lights Node Seat Pad (C v2.4B, aft) | 1 | Ours | same |
Source: slicing/jobs/g16-petg-servo-airspeed-radio-holders-and-slider.mdx, written by tools/print_jobs.py from tools/slice_all.py (g16-petg-Servo Airspeed Radio Holders and Slider).
Comments
Comment on the whole page here, or on one section or step with the button beside it.