Skip to content
TerraHawkTerraHawk
Hold: do not print the aircraft (Ryan, 2026-10-10). The first build is Fuselage C v2.4B, and its beds wait for Ryan's go. Bench tools and test prints are exempt: they are not airframe parts, so they can print now (Ryan, 2026-10-11).

g15: C Canopy Beacon Carrier Charge Camera Arm

Print jobs / First build

On hold: do not print this bed yet. All flight-part printing is held until Ryan releases the Fuselage C bed plan.

Fuselage C v2.4B Canopy (PETG) Fuselage C v2.4B Beacon Carrier (PETG) Charge Power Bracket Camera Arm Radio Cradle Base (XIAO, nose)
Top view to scale, 250 × 220 mm bed, 10 mm grid.

Parts

Point at a part to find it on the plan.

PartQtySourcePrinted from
Charge Power Bracket1Ourssame
Camera Arm1Ourssame
Radio Cradle Base (XIAO, nose)1Ourssame
Fuselage C v2.4B Canopy (PETG)1Ourssame
Fuselage C v2.4B Beacon Carrier (PETG)1Ourssame

Source: slicing/jobs/g15-petg-c-canopy-beacon-carrier-charge-camera-arm.mdx, written by tools/print_jobs.py from tools/slice_all.py (g15-petg-C Canopy Beacon Carrier Charge Camera Arm).

Comments on

    Comments are reviewed before they appear. Please leave out places, addresses and other personal details.

    A Supported Systems Flight

    This build log is written and kept by Supported Systems, a small studio that makes thoughtful, user-first technology. The airframe, the hangar and the simulation are ours.

    Visit supported.systems