Skip to content
TerraHawkTerraHawk
Hold: do not print the aircraft (Ryan, 2026-10-10). The first build is Fuselage C v2.4B, and its beds wait for Ryan's go. Bench tools and test prints are exempt: they are not airframe parts, so they can print now (Ryan, 2026-10-11).

Fuselage, one piece, nose joint to tail

Print jobs / Proposed

No plan: the geometry for this job is not made yet.

Parts

PartQtySourcePrinted from
Fuselage Front + Fuselage Mid + Tail Pusher, one piece1Kit, modifiednone

What it would take

Footprint
about 270 x 80 mm, standing
Glued joints it removes
  • Fuselage Front to Fuselage Mid (with connector rings)
  • Tail Pusher to Fuselage Mid
Waits on
The last of the three: about a day of printing in one piece. A shape change, so it goes through the design protocol; the new Fuselage Mid (th-blender) comes first.

Notes

Proposed for the 600 mm printer (2026-09-30). Not sliced: the geometry does not exist yet.

Source: slicing/jobs/p3-lw-fuselage-one-piece.mdx.

Comments on

    Comments are reviewed before they appear. Please leave out places, addresses and other personal details.

    A Supported Systems Flight

    This build log is written and kept by Supported Systems, a small studio that makes thoughtful, user-first technology. The airframe, the hangar and the simulation are ours.

    Visit supported.systems