Skip to content
TerraHawkTerraHawk
Hold: do not print the aircraft (Ryan, 2026-10-10). The first build is Fuselage C v2.4B, and its beds wait for Ryan's go. Bench tools and test prints are exempt: they are not airframe parts, so they can print now (Ryan, 2026-10-11).

VTOL Spar Jig

Print jobs / Bench tools

Changed since it was printed. The sliced file is not the one that printed on 2026-10-16 (job 76). A reprint uses the new file.

VTOL Spar Jig Front (C v2.4B, ours) VTOL Spar Jig Rear (C v2.4B, ours) (port) VTOL Spar Jig Rear (C v2.4B, ours) (starboard)
Top view to scale, 250 × 220 mm bed, 10 mm grid.

Parts

Point at a part to find it on the plan.

PartQtySourcePrinted from
VTOL Spar Jig Front (C v2.4B, ours)1Ourssame
VTOL Spar Jig Rear (C v2.4B, ours) (port)1Ourssame
VTOL Spar Jig Rear (C v2.4B, ours) (starboard)1Ourssame
DatePrinterJobFileResult
2026-10-16Prusa Core One+764ad14537earlier fileok; Ryan: "looks good". Job 73 before it stopped in bed probing (Z axis out of alignment), nothing extruded

Source: slicing/jobs/petg-vtol-spar-jig.mdx, written by tools/print_jobs.py from tools/slice_all.py (petg-VTOL Spar Jig).

Comments on

    Comments are reviewed before they appear. Please leave out places, addresses and other personal details.

    A Supported Systems Flight

    This build log is written and kept by Supported Systems, a small studio that makes thoughtful, user-first technology. The airframe, the hangar and the simulation are ours.

    Visit supported.systems