Skip to content
TerraHawkTerraHawk
Hold: do not print the aircraft (Ryan, 2026-10-10). The first build is Fuselage C v2.4B, and its beds wait for Ryan's go. Bench tools and test prints are exempt: they are not airframe parts, so they can print now (Ryan, 2026-10-11).

Coil Winder Mk2

Print jobs / Bench tools

Coil Winder Mk2 Head Cheek Coil Winder Mk2 Tail Cheek Coil Winder Mk2 Base Beam Coil Winder Mk2 Crank Wheel Coil Winder Mk2 Spool Cone Coil Winder Mk2 Spool Cone Coil Winder Mk2 Carriage Coil Winder Mk2 Spool Drum Coil Winder Mk2 Tail Knob Coil Winder Mk2 Tail Hub Coil Winder Mk2 Head Hub Coil Winder Mk2 Crank Handle Coil Winder Mk2 Spool Collar
Top view to scale, 250 × 220 mm bed, 10 mm grid.

Parts

Point at a part to find it on the plan.

PartQtySourcePrinted from
Coil Winder Mk2 Head Cheek1Ourssame
Coil Winder Mk2 Tail Cheek1Ourssame
Coil Winder Mk2 Crank Wheel1Ourssame
Coil Winder Mk2 Carriage1Ourssame
Coil Winder Mk2 Spool Drum1Ourssame
Coil Winder Mk2 Tail Knob1Ourssame
Coil Winder Mk2 Tail Hub1Ourssame
Coil Winder Mk2 Head Hub1Ourssame
Coil Winder Mk2 Crank Handle1Ourssame
Coil Winder Mk2 Spool Cone2Ourssame
Coil Winder Mk2 Base Beam1Ourssame
Coil Winder Mk2 Spool Collar1Ourssame

Source: slicing/jobs/pla-coil-winder-mk2.mdx, written by tools/print_jobs.py from tools/slice_all.py (pla-Coil Winder Mk2).

Comments on

    Comments are reviewed before they appear. Please leave out places, addresses and other personal details.

    A Supported Systems Flight

    This build log is written and kept by Supported Systems, a small studio that makes thoughtful, user-first technology. The airframe, the hangar and the simulation are ours.

    Visit supported.systems