Prusa Core One+ (Gen 2), second unit
In useA second enclosed printer for the PETG beds and the LW-PLA beds that fit 250 x 220, in parallel with the first Core One+.
- Build volume
- 250 / 220 / 270mmx · y · z9.8 in / 8.7 in / 10.6 in
- Hotend
- Prusa Nextruder, single tool, no INDX (3d-print-master, 2026-10-11)
- Nozzle
- HF0.4, not hardened (its Prusa Connect tool record, read by 3d-print-master, 2026-10-11)
- Enclosure
- Enclosed
- Firmware
- Prusa firmware
- Materials
- PLA Aero (LW-PLA), PETG, TPU 95A
- Slicer profile
- slicing/config/printer-coreone-hf04.ini
Ordered by Ryan on 2026-10-01. Check on arrival that the existing flattened Core One+ profile matches the Gen 2 machine (bed, nozzle, start G-code) before it slices from it.
It is off site, with PLA loaded (3d-print-master, via th-telemetry, 2026-10-11). It slices on the HF0.4 stack (core-one-plus-gen2 in tools/slice_all.py). The nozzle is not hardened, so do not print glass-filled or carbon-filled filament on it. PrusaLink’s local API does not report the flow rating, so check a nozzle change in Prusa Connect or on the printer. The first job is the coil winding tools in plain PLA.
Comments
Comment on the whole page here, or on one section or step with the button beside it.