Skip to content
TerraHawkTerraHawk
Hold: do not print the aircraft (Ryan, 2026-10-10). The first build is Fuselage C v2.4B, and its beds wait for Ryan's go. Bench tools and test prints are exempt: they are not airframe parts, so they can print now (Ryan, 2026-10-11).

Coil Winding Tools

Print jobs / Bench tools

Coil Winding Cradle Base ELRS Dipole Gauge Coil Winding Thumbwheel Coil Winding Thumbwheel Coil Winding Wire Guide
Top view to scale, 250 × 220 mm bed, 10 mm grid.

Parts

Point at a part to find it on the plan.

PartQtySourcePrinted from
Coil Winding Cradle Base1Ourssame
Coil Winding Thumbwheel2Ourssame
Coil Winding Wire Guide1Ourssame
ELRS Dipole Gauge1Ourssame

Source: slicing/jobs/pla-coil-winding-tools.mdx, written by tools/print_jobs.py from tools/slice_all.py (pla-Coil Winding Tools).

Comments on

    Comments are reviewed before they appear. Please leave out places, addresses and other personal details.

    A Supported Systems Flight

    This build log is written and kept by Supported Systems, a small studio that makes thoughtful, user-first technology. The airframe, the hangar and the simulation are ours.

    Visit supported.systems