Skip to content
TerraHawkTerraHawk
Hold: do not print the aircraft (Ryan, 2026-10-10). The first build is Fuselage C v2.4B, and its beds wait for Ryan's go. Bench tools and test prints are exempt: they are not airframe parts, so they can print now (Ryan, 2026-10-11).

Coil Winder Mk2 Feet and Brake Pads

Print jobs / Bench tools

Coil Winder Mk2 Foot (TPU) Coil Winder Mk2 Foot (TPU) Coil Winder Mk2 Foot (TPU) Coil Winder Mk2 Foot (TPU) Coil Winder Mk2 Foot (TPU) Coil Winder Mk2 Foot (TPU) Coil Winder Mk2 Brake Pad +0.4 (TPU) Coil Winder Mk2 Brake Pad +0.4 (TPU) Coil Winder Mk2 Brake Pad (TPU) Coil Winder Mk2 Brake Pad (TPU)
Top view to scale, 250 × 220 mm bed, 10 mm grid.

Parts

Point at a part to find it on the plan.

PartQtySourcePrinted from
Coil Winder Mk2 Foot (TPU)6Ourssame
Coil Winder Mk2 Brake Pad (TPU)2Ourssame
Coil Winder Mk2 Brake Pad +0.4 (TPU)2Ourssame

Source: slicing/jobs/tpu-coil-winder-mk2-feet-and-brake-pads.mdx, written by tools/print_jobs.py from tools/slice_all.py (tpu-Coil Winder Mk2 Feet and Brake Pads).

Comments on

    Comments are reviewed before they appear. Please leave out places, addresses and other personal details.

    A Supported Systems Flight

    This build log is written and kept by Supported Systems, a small studio that makes thoughtful, user-first technology. The airframe, the hangar and the simulation are ours.

    Visit supported.systems